Jiangsu QIangli Machinery Co.,Ltd

About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Company News
Home ProductsDoor Frame Roll Forming Machine

Hydraulic Galvanized Steel Door Frame Roll Forming Machine Fully Automatic Multi Model

Hydraulic Galvanized Steel Door Frame Roll Forming Machine Fully Automatic Multi Model

  • Hydraulic Galvanized Steel Door Frame Roll Forming Machine Fully Automatic Multi Model
  • Hydraulic Galvanized Steel Door Frame Roll Forming Machine Fully Automatic Multi Model
  • Hydraulic Galvanized Steel Door Frame Roll Forming Machine Fully Automatic Multi Model
  • Hydraulic Galvanized Steel Door Frame Roll Forming Machine Fully Automatic Multi Model
Hydraulic Galvanized Steel Door Frame Roll Forming Machine Fully Automatic Multi Model
Product Details:
Place of Origin: China
Brand Name: BLO
Certification: CE ISO SGS
Model Number: BL981703
Payment & Shipping Terms:
Minimum Order Quantity: 1 Set
Price: Negotiation
Packaging Details: Standard export packing with each machine tied and protected in container
Delivery Time: 60-90 days
Payment Terms: T/T
Supply Ability: 10set
Contact Now
Detailed Product Description
Name: Roof Panel Roll Forming Machine Diameter Of Main Shaft: 50mm
Motor Power Of Hydraulic Station: 3KW Material Specification:expanding Width: 140mm,thickness 0.8-1.2mm, Yield Strength≤G250Mpa
Main Motor Power: 5.5KW
High Light:

garage door roll forming machine


shutter door roll forming machine


Hydraulic Galvanized Steel Multi Model Door Frame Roll Forming Machine Quality Full Automatical Metal Door Frame


A, Main technical parameter

1. Material specification:expanding width:140mm,thickness 0.8-1.2mm, yield strength≤G250Mpa

2. Forming speed:15m/min(not including the stop cutting time)

3. Rollers:14 groups main forming rollers

4. Material of rollers:No.45# fine steel coated with chrome

5. Material of main shaft:No.45# fine steel with treatment

6. Diameter of main shaft: 50mm

7. Main motor power:5.5KW

8. Motor power of hydraulic station:3KW

9. Pressure of hydraulic station:12Mpa

10. Electronic control system:PLC control system

11. Punching,cutting type: hydraulic drive,punching and cutting after forming

12. Material of cutting blade:Cr12 with quenching


This machine is composed by 3T passive feeding device,main forming machine,back cutting device,hydraulic station,computer cabinet,run-out table.

C,Flow Chart

Feeding--leveling--roll forming--punching and cutting after forming--run out table

H, Payment:

Pay 30% of total cost as deposit, the balance before delivery. (Arrange the payment after the inspection of the machine is passed and before shipment.)

I, Warranty, Year warranty

During the warranty period, maintain and change the spare parts for the customers for free (except for the instrument damage caused by human factors or natural disasters.) And provide technical support for life-long.

Other descriptions,

1. Accompanied with working instructions and a CD .

2. Please operate as required.

3. Machine only to be shipped after the inspection is passed.

CE certificated, guaranteed quality.


Main Technical Parameters


Material Information
Coil Material
Yield Strength
Roller Material
Gcr15 HRC 58-62
Shaft Material
High grade 45# steel
Shaft Diameter
Main Motor Power
Forming Speed
Forming Stages
18 stages
Drive Mode
Motor + Chain drive
Punching Power
Cutting Type
Hydraulic Mold Cutting
Cutting Blade Material
Cr12 Mov

Main Machine Components

1 set
Feeding and Guiding Device
1 set
Roll Forming Line
1 set
Hydraulic Cutting Device
1 set
Hydraulic Station
1 set
Control System
1 set
Product Collecting Table
2 pieces
Packing & Delivery

1. A 40 feet container is required
2. The whole Wiped Anti Rust Oil, PLC controller covered by foam film
3. Spare parts and some small parts packed in plastic tooling box
4. All Components Fixed by steel wire with Container.



1: 3T hydraulic decoiler
Single unrolling machine, one side can put material
Adopt automatic hydraulic system for expand
Coil weight (Max)
Inter diameter
Maximal out diameter
Oil cylinder dia
Coil width (Max)
Working speed
0-15m/min adjustable
Main motor power
4KW AC motor
Hydraulic power
Frequency converter brand
De-coiler should be with Loop control and hold down, and with baffle for forbid coil fall down
The decoiler has 4 segments
1 set


2: Entrance table guide→flattener
Armed adjustable center of the forming rollers and of sufficient length to prevent lateral movement of the strip on its entry to flattene
Entrance table-guide
Entrance width range
Entrance and guide roller
diameter is ¢65mm, material is sae1045, HRC48-52° surface with chrome
The quantity of leveler rolls must be planned according to thickness 0.8mm to 1.5 mm.
Flattener roller: upper is 3 rollers, down is 4 stations(total is 7 rollers)
Flattener roller material
SAE 1045 thermal treatment hardness 48-52 HRC
Diameter of flattener shaf
¢56mm, material is SAE 1045, hardening and tempering
4KW AC motor
Speed controlled by frequency converter brand
main color in blue, drive parts by yellow
3: Servo feeding and punching system
Servo feeding system
This system adopt servo feeding to make high speed and precision
Servo power
Servo brand
Yaskawa (made in China)
Feeding roller
SAE 1045 thermal treatment hardness 48-52 HRC.
Feeding material requirement
width min 150mm
Material spec
thickness between 0.8mm and 1.5mm
Punching (include hydraulic station)
Base on customer provide punching drawing, this machine need adopt 5 units hydraulic punching system
Hydraulic station with Storage tank for provides pressure oil quantity in a short period of time, to meet the requirements of speed pressure
The whole punching operation should be automated and controlled by a program installed in the PC which is located in the operator's console.
Hydraulic power
Working pressure
12-20Mp adjustable
4:Feeding→roll forming→rectify device→post cutting
Profile steel thickness
between 0.8mm and 1.5mm
Feeding system
adjustable by hand wheel
Feeding width range
Feeding roller
diameter is ¢56mm, material is ASTM52100, HRC58-62egeree

roll forming
Main motor power
5.5kw, AC motor, side motor to save space
Machine Voltage, Frequency, Phase
380 V, 50 Hz, 3Phase
Roll station
17stations (base on final design)
Roller material
Gcr15, 58-62,HRC hardness and chrome plated surface
Shaft diameter
¢65mm material: SAE1045
rectify device
two station safter roll forming,
for revise the end product up and down/ left and right to straightness
Roller material: Roller material
GCR15 quenched 58°-62°finishing turning CNC
Adjust by hand wheel
Post cutting system
Cutting after forming
Cut the sheet after roll forming to required length
Material of blade
Cr12, 58-62 HRC hardness
Cutting blade
1 set
Cutting power
by hydraulic, 7.5KW with Storage tank
Working pressure
10-20Mpa adjustable
Length measuring
Automatic encoder length measuring, brand: Omron


5: Output table
welding by tube
about 2.0m long*0.3mwide*0.9mhigh
One out table with support roller
Supporter roller
ASTM 1045 with chrome
Diameter of rollers
2 units
6: hydraulic station
Hydraulic power
Working pressure
12-20Mp adjustable
Solenoid valve
6 groups (one for cutting)
Hydraulic oil
46# hydraulic oil
7: Control desk
Voltage, Frequency, Phase
380 V, 50 Hz, 3Phase
Control panel
Button-type switch and touch screen
Unit of length
millimeter (switched on the control panel)
PLC brand
Frequency converter brand
Yaskawa, quantity: 1
Touch screen
Taiwan Weinview


Advantage of machine


1. Reasonable Price


2. High Quality


3. 12 Months Warranty


4. More Than 10 Years Experience


5. Durable


6. Reliable



Glazed Tile Roll Forming Machine,cold Roll Forming Equipment




Contact Details
Jiangsu QIangli Machinery Co.,Ltd

Contact Person: Mr. Frank

Tel: +86-13063767817

Fax: 86-510-82123468

Send your inquiry directly to us (0 / 3000)