Wuxi BoLo Machinery Equipment Co.,Ltd.
|Place of Origin:||CHINA|
|Certification:||CE ISO SGS|
|Minimum Order Quantity:||ONE SET|
|Packaging Details:||EXPORT PACKING|
|Power Of Hydraulic System:||4KW||Total Power(kw):||7kw|
|Productivity:||0-15m/min||Voltage:||AC380/50/60Hz Or At Buyer's Request|
Tile curving/crimping/bending machine corrugated roofing cap crimp machine
This machine is mainly used in the production of pressing & bending sheets. This equipment is made up of five main parts: guiding , transmission, pressing&bending, hydraulic station, control station.
There are two ways in pressing&bending of the products: automatic and manual. The automatic way is used is mass production after the length of the sheets is determined. The manual way is only used in testing or feed the first sheet of each new sheet.
Before the operation of the pressing&bending system, you must check the oil tank. Hydraulic oil level must reach to the upper line, start the oil pump and also test the movement of the equipment to be normal.
|material: G.I/A.L or colored armor plate|
|Voltage||AC380/50/60Hz or at buyer's request|
|Thickness of sheet(mm)||0.4-0.8|
|Producing capability||3500 m2/8hs|
|Diameter of shaft||70mm|
|Dimension of main structure(mm)||7000x1800x1500|
|Material of rollers||45# steel with heat treatment and surface is being hard chrome|
|Power of hydraulic system||4KW|
|Power of main molding core||4kw(cycloidal planetary gear speed reducer)|
Manual Uncoiler — Entry Beach — Roll Forming Machine — Automatic Shearing Mechanism —
Computer Control Cabinet —Run-out Tables