Wuxi BLO Machinery Equipment Co., Ltd.
|Place of Origin:||China|
|Certification:||CE ISO SGS|
|Minimum Order Quantity:||ONE SET|
|Packaging Details:||Standard export packing with each machine tied and protected in container|
|Delivery Time:||60-90 days|
|Product Name:||Automatic CZ Purlin Steel Profile Roll Forming Machine||Production Capacity:||8-12m/minute|
Automatic CZ purlin steel profile roll forming machine with CW Flange punching
CZ interchangeable machines can produce C and Z rafters. It can realize the conversion of C and Z rafters by changing the upper and lower positions of one roller. It takes half an hour to save time. It can also adjust the lateral distance of the roller to adjust the width of C or Z rafter. High precision and time saving to increase production.It can automatically cut to length, punch and forming, workers just need to set the length, hole distance, quantity, etc into the control system. Produce from C to Z purlin by switch one side roller, only need about 15 minutes. This machine also can adjust roller horizontal distance to achieve C or Z purlins of the width with high precision automatic.
Working Flow of CZ Purlin Roll Forming Machine
De-coiler--Coil strip feeding--Roll forming--Hydraulic Punching--Cut to length--Run out table
Technical Specifications of CZ Purlin Roll Forming Machine
|Suitable Material||Galvanized steel sheet, Black sheet|
|The thickness of raw material||-3.0mm (235Mpa)|
|Size of C purlin||80-240mm adjustable (special size available)|
|Material of roller||Gcr15 quenched treatment,HRC58-60|
|The material of cutter blade& punching die||Cr12Mov mould steel being quenched treatment, HRC58-62|
|Material of shaft||40Cr quench treatment. Roller grinder milling.|
|Forming speed||About 8-12m/min|
|Power Requirement||Main motor power: 15 KW(Depend on final design)|
|Hydraulic station power: 5.5Kw (Depend on final design)|
|The diameter of the shaft for rollers||75mm|
|Controlling system||Panasonic PLC & converter|
|Quantity of rollers||About 16 stations for main rollers|
|Weight of machine||About 10T|
|Size of machine installation||about 10m*1.8m*1.8m(Depend on customer's request)|
All technical parameters can be changed, according to your needs.
(1) Main Purline Forming Machine;
(2) 5 Tons of Hydraulic Un-coiler;
(3) Automatic Guide Device;
(4) Hydraulic Motor System ;
(5) PLC Computer Controlling System with Touching Screen ;
(6) Pre-punching Holes Device;
(7) Pre-cutting Device;
(8) Reshaping Device;
(9) PLC Automatic Controlling System For Adjusting Size From 60mm to 300mm; PLC Automatic Controlling System For interchange C to Z Purline;
(10) Run Out Table(4 pcs);
(11 ) Tools;
(12) Operation Manual.
1. Produce different purlin sizes without changing rollers or spacers.
2. No need changing cutter for a different size.
3. Easy operation, low maintenance cost.
4. Infinite sizing(any size within machine range), helps to save material.
5. Optional Punch hole at any position of purlin web side and flange side.
1. One 40ft container for loading one set machine with manual decoiler;
2. The whole Wiped Anti Rust Oil, PLC controller covered by foam film;
3. Spare parts and some small parts packed in plastic tooling box;
4. All Components Fixed by steel wire with Container.